Mercury XR2 Manual de Instalação descarregar pdf (Página 16)

- 16 -

4. After the location has been selected for the thru-

hull fitting, drill a 14.3 mm (9/16 in.) diameter hole.

5. Apply Marine Sealer to entire length of threads

and under the head of the thru-hull fitting. Fasten

the fitting into the transom with the brass nut (pro-

vided).

a - Thru-Hull Fitting

b - Brass Nut

c - Marine Sealer

6. Connect the water by-pass hose to the thru-hull

fitting with the hose clamp (provided). Make sure

the hose slopes at a minimum rate of 25mm (1 in.)

drop per 300 mm (12 in.) of hose.

a - Hose Clamp

b - Water By-Pass Hose

Installing Powerhead

1. Install gasket on drive housing cover.

28242

a - Gasket

b - Drive Housing Cover O-Ring

c - Slinger

d - “TOP” Facing Up

2. Install drive housing cover O-ring.

3. Check that slinger is on driveshaft. Ensure “TOP”

is facing up on gasket.

4. Lubricate drive shaft splines with Special Lubri-

cant 101.

5. Lower powerhead on drive housing cover. Align

driveshaft splines with crank shaft splines, and

powerhead mounting studs with adapter plate

holes.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Sem comentários

Mercury XR2 Manual de Instalação Página 16