Mercury 2005 Sable Especificações

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 13Entertainment Systems 15AM/FM stereo cassette 15AM/FM stereo with CD 18CD cha

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

Safety belt usage sensorsThe driver and front outboard passenger safety belt buckles areequipped with sensors that detect if the safety belts are fast

Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a righ

To fasten the belt, pull the combination lap and shoulder belt from theretractor so that the shoulder belt portion of the safety belt crosses yourshou

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an air bag” Air bags offer greater protection whenused with safety belts. Frontal airbagsare not designed to infla

Before following the procedure, make sure that:• The parking brake is set• The gearshift is in P (Park) (automatic transmission)• The ignition switch

Do not use extensions to change the fit of the shoulder beltacross the torso.Safety belt maintenanceInspect the safety belt systems periodically to ma

supplement to the safety belts. Air bags alone cannot protect as well asair bags plus safety belts in impacts for which the air bags are designedto de

Brake system warning light: Toconfirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the ON

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.National Highway Traffic Safety

Children and air bagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rea

of air bag deployment. Thus, it is extremely important that occupants beproperly restrained as far away from the air bag module as possible whilemaint

Even with the front passenger sensing system, children 12 andunder should be properly restrained in the back seat.When the front passenger seat isoccu

After all occupants have adjusted their seats and put on safety belts, it’svery important that they continue to sit upright with their back againstthe

An out of position front center occupant could affect thedecision of the front passenger sensing system.If it is necessary to modify an advanced front

Do not use accessory seat covers. The use of accessory seatcovers may prevent the deployment of the side air bags andincrease the risk of injury in an

The air bag SRS is designed to activate when the vehicle sustains lateraldeceleration sufficient to cause the sensors to close an electrical circuitth

require that children use approved booster seats until they are eightyears old. Check your local and state or provincial laws for specificrequirements

Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips and the kneesbend

Engine oil pressure: Illuminateswhen the oil pressure falls below thenormal range, refer to Engine oil inthe Maintenance andSpecifications chapter.Tra

• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo

SAFETY SEATS FOR CHILDRENChild and infant or child safety seatsUse a safety seat that is recommended for the size and weight of thechild. Carefully fo

Carefully follow all of the manufacturer’s instructions includedwith the safety seat you put in your vehicle. If you do not installand use the safety

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a

Installing child safety seats in the lap belt seating positions1. Lengthen the lap belt. To lengthen the belt, hold the tongue so that itsbottom is pe

1. Position the child safety seat on the seat cushion.2. Route the child safety seat tether strap over the back of the seat.For vehicles with adjustab

On wagons, snap the tether anchorcover off the anchor under the loadfloor.5. Clip the tether strap to the anchor as shown.• Sedan• WagonIf the tether

If the safety seat is not anchored properly, the risk of a childbeing injured in a collision greatly increases.Attaching safety seats with LATCH (Lowe

The lower anchors for child seatinstallation are located at the rearsection of the rear seat between thecushion and seat back. The LATCHanchors are be

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o

• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the

Inspecting your tiresPeriodically inspect the tire treads for uneven or excessive wear andremove stones, nails, glass or other objects that may be wed

higher than the manufacturer’s recommended cold inflation pressurewhich can be found on either the tire label or certification label which islocated o

TIRE REPLACEMENT REQUIREMENTSYour vehicle is equipped with tires designed to provide a safe ride andhandling capability.Only use replacement tires and

If you use the temporary spare tire continuously or do not followthese precautions, the tire could fail, causing you to lose controlof the vehicle, po

the road tires and wheels that were originally provided by Ford. If thedissimilar spare tire or wheel is damaged, it should be replaced ratherthan rep

To help prevent the vehicle from moving when you change a tire,be sure the parking brake is set, then block (in both directions)the wheel that is diag

3. If equipped with a wheel coverthat’s bolted on, loosen the fiveplastic nuts with the lug nutwrench.4. Remove the center ornament or wheel cover fro

Tachometer: Indicates the enginespeed in revolutions per minute.Driving with your tachometerpointer continuously at the top ofthe scale may damage the

10. Remove the jack and fullytighten the lug nuts in the ordershown. Refer to Wheel lug nuttorque specifications later in thischapter for the proper l

When a wheel is installed, always remove any corrosion, dirt orforeign materials present on the mounting surfaces of the wheelor the surface of the fr

5. 15: Indicates the wheel or rim diameter in inches. If you change yourwheel size, you will have to purchase new tires to match the new wheeldiameter

numbers represent the week and year the tire was built. For example,the numbers 317 mean the 31st week of 1997. After 2000 the numbersgo to four digit

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE CAREImproper or inadequate vehicle maintenance can also cause tires to wearabnormally. Here are some of the important maintenance items:Tire wear

Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire rotationRotating your tire

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can

AM/FM STEREO CASSETTE/MACH姞 AUDIO SYSTEM WITH AM/FMSTEREO CASSETTE (IF EQUIPPED)1. Tape: Insert the cassette with theopening to the right. If a tape i

SNOW TIRES AND CHAINSSnow tires must be the same size and grade as the tires youcurrently have on your vehicle.The tires on your vehicle have all weat

Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your dealer plus any aftermarket equipment.Payload – is the combined

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAW (Gross Axle Weight) – is the total weight placed on each axle(front and rear) – including vehicle curb weight and all payload.GAWR (Gross Axle Wei

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o

The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• An example for your vehicle with 1

Towing a trailer places an additional load on your vehicle’s engine,transaxle, brakes, tires and suspension. Inspect these componentscarefully after t

Safety chainsAlways connect the trailer’s safety chains to the frame or hook retainersof the vehicle hitch. To connect the trailer’s safety chains, cr

Trailer towing tips• Practice turning, stopping and backing up before starting on a trip toget the feel of the vehicle trailer combination. When turni

6. Balance: Press / to shiftsound to the left/right speakers.7. Fade: Press/ to shiftsound to the rear/front speakers.8. Scan: Press SCAN to hear a br

STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo

Extended idling at high engine speeds can produce very hightemperatures in the engine and exhaust system, creating the riskof fire or other damage.Do

2. Make sure the headlamps and electrical accessories are off.• Make sure the parking brake isset.• Make sure the gearshift is in P(Park).• Turn the k

Make sure the corresponding lights illuminate or illuminate briefly. If alight fails to illuminate, have the vehicle serviced.• If the driver’s safety

If the engine fails to start using the preceding instructions (flexiblefuel vehicles only)1. Press and hold down the accelerator 1/3 to 1/2 way to flo

when the brakes are applied. Such noises are usually heard during the firstfew brake applications in the morning; however, they may be heard at anytim

ABS warning lampThe ABS lamp in the instrumentcluster momentarily illuminateswhen the ignition is turned on. Ifthe light does not illuminate duringsta

TRACTION CONTROL姟 (IF EQUIPPED)Your vehicle may be equipped with a Traction Control娂 system. Thissystem helps you maintain the stability and steerabil

STEERINGTo prevent damage to the power steering system, never hold the steeringwheel at its furthest turning points (until it stops) for more than a f

When the key is in the ignition and in the OFF position, theautomatic transmission shift lever can be moved from the P(Park) position without the brak

16. Tune: Works in radio mode orCD mode. Press/ to changefrequency down/up or previous/nextdisc.17. Cassette door: Insert acassette into the cassette

If your vehicle is equipped with aconsole-mounted gearshift lever, youmust press the thumb button on theside of the gearshift lever to movethe gearshi

parameters. This learning process could take several transmissionupshifts and downshifts; during this learning process, slightly firmershifts may occu

1 (First)• Provides maximum engine braking.• Allows upshifts by moving gearshift lever.• Will not downshift into 1 (First) at high speeds; allows for

GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program

Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will

If your vehicle is a sedan, the fuelpump shut-off switch is located onthe right side of the trunk behindthe trunk liner.If your vehicle is a wagon, th

FUSESIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinthe fuse. Check th

To remove a fuse use the fuse puller tool provided on the fuse panel cover.The fuses are coded as follows.Fuse/relaylocationFuse ampratingPassenger co

Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription19 10A Heated mirrors, Rear defrost switch indicator20 10A Restraints (air

Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription37 25A Autolamp, Daytime Running Lamps (DRL),Flash-to-pass, Headlamp switch

AUDIO SYSTEM WITH AM/FM STEREO/SINGLE CD PLAYER(IF EQUIPPED)1. Clock: To set the hour, press andhold the H control. When thedesired hour appears, rele

The high-current fuses are coded as follows.Fuse/relaylocationFuse ampratingPower distribution box description1 60A** Fuse junction panel2 30A** Power

Fuse/relaylocationFuse ampratingPower distribution box description18 10A* (Vulcanengine only)A/C clutch relay, PCM keep alive power— (Duratecengine on

JUMP STARTING YOUR VEHICLEThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable. Make th

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Lincoln or Mercury vehicle to an authorized LincolnMercury dealer for warranty repairs. While a

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

6. Scan: Press to hear a briefsampling of all listenable radiostations or CD tracks. Press again tostop.7. CD: Press to play a CD. Pressagain to toggl

In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a

THE DISPUTE SETTLEMENT BOARD (U.S. ONLY)The Dispute Settlement Board is:• an independent, third-party arbitration program for warranty disputes.• avai

Board membershipThe Board consists of:• Three consumer representatives• A Ford or Lincoln Mercury dealership representativeConsumer candidates for Boa

Oral presentationsIf you would like to make an oral presentation, indicate YES to question6 on the application. While it is your right to make an oral

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)In those cases where you continue to feel that the efforts by Ford andthe dealer to resolve a

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

PAINT CHIPSYour dealer has touch-up paint and sprays to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jam

• 3.0L Vulcan engine• 3.0L Duratec engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PL

Seating and Safety Restraints 87Seating 87Safety restraints 92Air bags 108Child restraints 117Tires, Wheels and Loading 130Tire Information 131Tire In

16. EJ (Eject): Press to eject a CD.17. AM/FM: Press to choose afrequency band (AM/FM1/FM2).CD CHANGER (IF EQUIPPED)Your CD changer is either located

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

• If grease or tar is present on the material, spot-clean the area firstwith Motorcraft Spot and Stain Remover (ZC-14).• Never saturate the seat cover

FORD, LINCOLN AND MERCURY CAR CARE PRODUCTSYour Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect i

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a

Working with the engine on1. Set the parking brake and ensure the gearshift is securely latched in P(Park).2. Block the wheels to prevent the vehicle

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.0L V6 Vulcan engine1. Automatic transmission fluid dipstick2. Brake fluid reservoir3. Air filter ass

3.0L DOHC V6 Duratec engine1. Automatic transmission fluid dipstick2. Brake fluid reservoir3. Air filter assembly4. Battery5. Engine oil dipstick6. En

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Checking and adding washer fluid for the liftgate (Wagon)The opening for the reservoir islocated on the passenger side underthe tail lamp. Refill this

5. Locate and carefully remove the engine oil indicator (dipstick).• 3.0L Vulcan engine• 3.0L Duratec engineREVIEW COPY2005 Sable (sab), Owners Guide

5. Line up the CD with the grooveof the disc holder. Ensure that thelabel on the CD faces downwards.6. Press the disc holder until it lockssecurely in

6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.• If the oil level is between the two holes or between the MIN andMAX mar

3. Recheck the engine oil level. Make sure the oil level is not above theupper hole or MAX mark on the engine oil level indicator (dipstick).4. Instal

It is recommended you use the appropriate Motorcraft oil filter (oranother brand meeting Ford specifications) for your engine application.BATTERYYour

When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a

If the battery has been disconnected or a new battery has been installed,the clock and radio settings must be reset once the battery isreconnected.• A

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur

remove the coolant pressure relief cap on the radiator of a vehicle withan overflow system, follow these steps to add engine coolant.To reduce the ris

Used engine coolant should be disposed of in an appropriatemanner. Follow your community’s regulations and standards for recyclingand disposing of aut

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautionsDo not overfill the fuel tank. The pressure in an overfilled tankmay cause leak

• Tighten very loose tapes by inserting a finger or pencil into the holeand turning the hub.• Remove loose labels before inserting tapes.• Allow tapes

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek med

Flexible fuel components and standard unleaded gasoline fuelcomponents are not interchangeable. If your vehicle is notserviced in accordance with flex

If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The customer warranty maybe void for any

Unleaded Gasoline enginesYour vehicle is designed to use “Regular” unleaded gasoline with an(R+M)/2 octane rating of 87. We do not recommend the use o

checking the VIN, look for the engine type identifier (8th character). Ifyour vehicle is an FFV, then the character will be labeled as a “2”.If you op

ESSENTIALS OF GOOD FUEL ECONOMYMeasuring techniquesYour best source of information about actual fuel economy is you, thedriver. You must gather inform

Calculating fuel economy1. Fill the fuel tank completely and record the initial odometer reading(in miles or kilometers).2. Each time you fill the tan

•You may want to turn off the speed control in hilly terrain if unnecessaryshifting between third and fourth gear occurs. Unnecessary shifting ofthis

It is important to note the box in the lower left corner of the windowsticker. These numbers represent the Range of MPG (L/100 km)expected on the vehi

sells, leases, trades vehicles, or supervises a fleet of vehicles are notpermitted to intentionally remove an emission control device or preventit fro

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Passenger air

condition. To ready the on-board diagnostics system for I/M testing, aminimum of 30 minutes of city and highway driving is necessary asdescribed below

1. Start the engine and let it run until it reaches normal operatingtemperature (the engine coolant temperature gauge indicator will benear the center

BRAKE FLUID RESERVOIRThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the

7. Remove the dipstick and inspect the fluid level. The fluid should be inthe designated areas for normal operating temperature.Low fluid levelDo not

Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and re

REFILL CAPACITIESFluid Ford Part Name Application CapacityBrake fluid Motorcraft HighPerformance DOT 3Motor VehicleBrake FluidAll Between MAX andMIN o

LUBRICANT SPECIFICATIONSItemsFord Part Nameor equivalentFord PartNumberFordSpecificationBrake fluid Motorcraft HighPerformance DOT3 Motor VehicleBrake

Some transmission fluids may be labeled as dual usage, such asMERCON威 and MERCON威 V. These dual usage fluids are not to be usedin an automatic transmi

REVIEW COPY2005 Sable (sab), Owners Guide (post-2002-fmt) (own2002),Market: USA_English (fus)Maintenance and Specifications238

IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Certification label be affixedt

OPERATING TIPS• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity buildup

Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Plea

MERCURY ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Mercury Accessories are available for yourvehicle through your local authorized Mercur

LifestyleBike racksCargo organization and managementSmoker’s packPeace of mindFirst aid and highway safety kitsAirbag anti-theft locksWheel locksVehic

AAccessory delay ...49Air bag supplemental restraintsystem ...108–109, 115and child safety seats ...

Cleaning your vehicleengine compartment ...198instrument panel ...200interior ...200inte

Engine oil ...208checking and adding ...208dipstick ...208filter, specifica

JJack ...135positioning ...135storage ...135Jum

RRadio ...15, 18Rear window defroster ...28Relays ...181Remote ent

Transaxlefluid, refill capacities ...235lubricant specifications ...237Transmission ...168brake-shift inte

AUTOMATIC TEMPERATURE CONTROL SYSTEM (IF EQUIPPED)1. OFF: Outside air is shut out andthe climate control system is turnedoff.2. A/C: Press to activate

6. AUTO: Press to engage fullautomatic operation, and select thedesired temperature using thetemperature control. The system will automatically determ

OPERATING TIPS• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

REAR WINDOW DEFROSTERThe rear defroster control is locatedon the instrument panel.Press the rear defroster control toclear the rear window of thin ice

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola

Maintenance and Specifications 203Engine compartment 205Engine oil 208Battery 212Fuel information 219Part numbers 234Refill capacities 235Lubricant sp

Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a reduced output.To activate:• the ignition must be in the ON position,• the head

PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and all applicableswitches in the vehicle duringheadlamp and parklamp operatio

4. On the wall or screen you willobserve an area of high intensitylight. The top of the high intensityarea should touch the horizontalreference line,

INTERIOR LAMPSMap lamps/dome lamp (without moon roof)The map lamp controls are locatedon the dome lamp. Press thecontrols on either side of each lenso

Map lamps (with moon roof)The map lamps are located on themoon roof control panel. Press thecontrols on either side of each maplamp to activate the la

Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbs mustbe marked with an authorized “D.O.T.” for North America an

Replacing headlamp bulbsTo remove the headlamp bulb:1. Make sure headlamp switch is inOFF position and open the hood.2. Remove the bolt (1) from thehe

5. Disconnect the electricalconnector from the bulb by pullingrearward.6. Remove the bulb retaining ring byrotating it counterclockwise.7. Remove the

2. Install the bulb retaining ring over the plastic base and lock the ringby rotating clockwise until it snaps into place.3. Connect the electrical co

5. Carefully pull bulb straight out ofthe socket and push in the newbulb.6. Install the bulb socket into thelamp assembly by rotating itclockwise.7. C

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Replacing high-mount brakelamp bulbs — Wagon only1. Open liftgate.2. Remove two screw covers, screwsand handle from liftgate.3. Remove two screws and

7. Carefully lift the lamp assemblyaway from the liftgate.8. Remove the bulb socket byrotating it counterclockwise andpulling it out from the lampasse

Replacing license plate lamp bulbsWagon1. Make sure headlamp switch is inOFF position and remove screw andthe license plate lamp assemblyfrom liftgate

Replacing tail/brake/turn signal/backup lamp bulbsSedanThe tail lamp, brake lamp, turnsignal lamp and backup lamp bulbsare located in the same portion

WagonThe tail lamp/turn lamp/brakelamp/backup bulbs are located inthe same portion of the tail lampassembly, one just below the other.Follow the same

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Press the washer control to activatethe rear washer. The wiper willcome on when the washer control ispressed, if it is not already on.Changing the wip

TILT STEERING WHEELTo adjust the steering wheel:1. Pull and hold the steering wheelrelease control toward you.2. Move the steering wheel up ordown unt

The auxiliary power point is located on the instrument panel below theoptional cigarette lighter (if equipped).POWER WINDOWSDo not leave children unat

Accessory delayWith accessory delay, the window switches may be used for up to tenminutes after the ignition switch is turned to the OFF position or u

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re

Note:• Vehicle speed may vary momentarily when driving up and down asteep hill.• If the vehicle speed increases above the set speed on a downhill, you

Reducing speed while using speed controlThere are three ways to reduce aset speed:• Press and hold the CST controluntil you get to the desiredspeed, t

MOON ROOF (IF EQUIPPED)You can move the glass panel of themoon roof back to open or tilt up toventilate the vehicle.To open the moon roof:The moon roo

Do not use the HomeLink威 Wireless Control System with any garagedoor opener that lacks safety stop and reverse features as required byU.S. federal saf

3. Simultaneously press and holdboth the HomeLink威 and hand-heldtransmitter button. Do not releasethe buttons until Step 4 hasbeen completed.Some entr

Gate Operator & Canadian ProgrammingDuring programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time for

Erasing HomeLink姞 buttonsTo erase the three programmedbuttons (individual buttons cannotbe erased):• Press and hold the two outerHomeLink威 buttons unt

Info menuThis control displays the followingcontrol displays:• Odometer• Distance to Empty• Average Fuel Economy• Trip odometer• Trip Elapsed Drive Ti

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in liters/100 km ormiles/U.S. gallon.If you calcu

SPECIAL NOTICESEmission warrantyThe New Vehicle Limited Warranty includes Bumper-to-BumperCoverage, Safety Restraint Coverage, Corrosion Coverage, and

Outside air temperature (if equipped)Press and hold the INFO button for2 seconds to display the outsidetemperature. To switch from a blankdisplay to t

2. Start the engine.3. Press and hold the INFO button for 2 seconds to select theCompass/Odometer function. (Do not select Trip, DTE, or AFE. The topo

9. Slowly drive the vehicle in acircle (less than 3 mph [5 km/h])until the CIRCLE SLOWLY TOCALIBRATE indicator changes toCALIBRATION COMPLETED. Thiswi

Units (English/Metric)1. Select this function from theSETUP menu for the current unitsto be displayed.2. Press the RESET control tochange from English

Warning messages that have been reset are divided into three categories:• They will not disappear until a condition is changed.• They will reappear on

PARK BRAKE ENGAGED. Displayed when the park brake is engaged.If the warning stays on after the park brake is off, contact your dealer assoon as possib

LIFTGATE AJAR (if equipped). Displayed when the liftgate is notcompletely closed.CHECK TRACTION CONTROL (if equipped). Displayed when theTraction Cont

• Rear ashtray (see your Ford, Lincoln Mercury dealer to obtain rearashtrayUse only soft cups in the cupholder. Hard objects can injure youin a collis

POSITIVE RETENTION FLOOR MATPosition the driver floor mat so thatthe eyelet is over the pointed end ofthe retention post and rotateforward to lock in.

The liftgate and liftgate window should be closed before driving yourvehicle. If not, possible damage may occur to the liftgate lift cylindersand atta

Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.Please read the section Supplemental restraint

Do not place any objects on the cargo area cover. They mayobstruct your vision or strike occupants of the vehicle in thecase of a sudden stop or colli

The cover may cause injury in a sudden stop or accident if it isnot securely installed.Cargo utility hooks (Sedan)The utility hooks located inside the

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

1. Turn the ignition to the 4 (ON)position, then press the power doorUNLOCK control 3 times.2. Turn the ignition to the 3 (OFF)position, then press th

INTERIOR LUGGAGE COMPARTMENT RELEASEYour vehicle is equipped with a mechanical interior luggage compartmentrelease handle that provides a means of esc

REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to the fol

The inside lights will not turn off if:• they have been turned on using the dimmer control or• any door is open.The battery saver feature will turn of

Replacing the batteryThe remote entry transmitter uses one coin type three-volt lithiumbattery CR2032 or equivalent.To replace the battery:1. Twist a

How to reprogram your remote entry transmittersYou must have all remote entry transmitters (maximum of four)available before beginning this procedure.

The inside lights will not turn off if:• they have been turned on with the dimmer control, or• any door is open.The battery saver will shut off the in

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-

4. Press the power door unlock control twice within 5 seconds. Note:The horn will chirp twice to indicate the perimeter lighting feature hasbeen deact

Erasing personal codes1. Enter the factory set 5–digit code. The keyless entry keypad andinterior lights will illuminate and the driver’s door will un

To deactivate/reactivate the autolock feature using the power doorunlock controlYou must complete Steps 1-4 within 30 seconds or the procedure willhav

objects will not cause damage to the coded key, but may cause amomentary issue if they are too close to the key when starting theengine. If a problem

Replacing coded keys can be very costly. Store an extra programmed keyaway from the vehicle in a safe place to help prevent anyinconveniences. Please

9. Your new unprogrammed key is now programmed.If the key has been successfully programmed it will start the vehicle’sengine and the theft indicator l

Disarming the systemYou can disarm the system by any of the following actions:• Unlock the doors by pressing thecontrol on your remote entrytransmitte

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Using the manual lumbar support (if equipped)The lumbar control is located on thefront of the seat cushion.Turn to adjust lumbar support.Adjusting the

Adjusting the front power seat (if equipped)The control is located on the outboard side of the seat cushion.Press to raise or lower the frontportion o

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

REAR SEATS2nd seat/split-folding rear seat (if equipped)SedanPull the loop forward to release theseatback and then fold the seatbackdown.WagonLift the

3rd seat (if equipped) (wagon only)The third seat faces the rear of the vehicle. For height and weight limits,see the label on the seat cushion. When

SAFETY RESTRAINTSPersonal Safety SystemThe Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupant

impacts or rear impacts) unless the collision causes sufficientlongitudinal deceleration. The pretensioners are designed to activate infrontal and nea

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.The front passenger sensing syst

Determining if the Personal Safety System is operationalThe Personal Safety System uses a warning light in the instrumentcluster or a back-up tone to

It is extremely dangerous to ride in a cargo area, inside oroutside of a vehicle. In a collision, people riding in these areasare more likely to be se

2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.Energy management retractorsYour vehicle has a seat belt system equipped w

How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt

After any vehicle collision, the seat belt system at all outboardseating positions (except driver, which has no “automatic lockingretractor” feature)